- Upgrade Hardware
- Optimize Software
- Database Tuning
- Adding Servers
- Additional Resources
Whether you run a high traffic WordPress installation or a small blog on a low cost shared host, you should optimize WordPress and your server to run as efficiently as possible. This article provides a broad overview of WordPress optimization with specific recommended approaches. However, it’s not a detailed technical explanation of each aspect.
If you need a quick fix now, go straight to the Caching section, you’ll get the biggest benefit for the smallest hassle there. If you want to get started on a more thorough optimization process immediately, go to How Do You Improve Performance in WordPress.
A broad overview of the topic of performance is included below in What Affects Performance and How Do You Measure Performance. Many of the techniques discussed here also apply to WordPress Multisite (MU).
Performance factors Performance factors
Several factors can affect the performance of your WordPress blog (or website). Those factors include, but are not limited to, the hosting environment, WordPress configuration, software versions, number of graphics and their sizes.
Most of these performance degrading factors are addressed here in this article.
The optimization techniques available to you will depend on your hosting setup.
Shared Hosting Shared Hosting
This is the most common type of hosting. Your site will be hosted on a server along with many others. The hosting company manage the web server for you, so you have very little control over server settings and so on.
Virtual Hosting and Dedicated Servers Virtual Hosting and Dedicated Servers
In this hosting scenario you have control over your own server. The server might be a dedicated piece of hardware or one of many virtual servers sharing the same physical hardware.
The key thing is, you have control over the server settings. In addition to the areas above (caching and WordPress performance, the key areas of interest here are: Server Optimization and Content Offloading
Number of Servers Number of Servers
When dealing with very high traffic situations it may be necessary to employ multiple servers. If you’re at this level, you should already have employed all of the applicable techniques listed above.
The WordPress database can be easily moved to a different server and only requires a small change to the config file. Likewise images and other static files can be moved to alternative servers (see content offloading).
Amazon’s Elastic Load Balancer can help spread traffic across multiple web servers but requires a higher level of expertise. If you’re employing multiple database servers, the HyperDB class provides a drop-in replacement for the standard WPDB class, and can handle multiple database servers in both replicated and partitioned structures.
Hardware Performance Hardware Performance
Your hardware capability will have a huge impact on your site performance. The number of processors, the processor speed, the amount of available memory and disk space as well as the disk storage medium are important factors. Hosting providers generally offer higher performance for a higher price.
Geographical distance Geographical distance
The distance between your server and your website visitors also has an impact on performance. A Content Delivery Network or CDN can mirror static files (like images) across various geographic regions so that all your site visitors have optimal performance.
Server Load Server Load
The amount of traffic on your server and how it’s configured to handle the load will have a huge impact as well. For example, if you don’t use a caching solution, performance will slow to a halt as additional page requests come in and stack up, often crashing your web or database server.
If configured properly, most hosting solutions can handle very high traffic amounts. Offloading traffic to other servers can also reduce server load.
Abusive traffic such as login Brute Force attacks, image hotlinking (other sites linking to your image files from high traffic pages) or DoS attacks can also increase server load. Identifying and blocking these attacks is very important.
Software version & performance
Making sure you are using the latest software is also important, as software upgrades often fix bugs and enhance performance. Making sure you’re running the latest version of Linux (or Windows), Apache, MySQL/MariaDB and PHP is very important.
Your theme will have a huge impact on the performance of your site. A fast, lightweight theme will perform much more efficiently than a heavy graphic-laden inefficient one.
The number of plugins and their performance will also have a huge impact on your site’s performance. Deactivating and deleting unnecessary plugins is a very important way to improve performance.
Keeping up with WordPress upgrades is also important.
Size of Graphics
Making sure the images in your posts are optimized for the web can save time, bandwidth and increase your search engine ranking.
Performance testing tools
- Webpagetest is a tool for testing real life website performance from different locations, browsers and connection speeds.
- Google PageSpeed Insights is way to measure your WordPress site’s performance and receive clear, specific feedback on how to make improvements.
- The built-in browser developer tools (ie. Firefox or Chrome) all have performance measurement tools.
How to improve performance in WordPress
Optimizing Your WordPress Website
Minimizing Plugins Minimizing Plugins
The first and easiest way to improve WordPress performance is by looking at the plugins. Deactivate and delete any unnecessary plugins. Try selectively disabling plugins to measure server performance.
Is one of your plugins significantly affecting your site’s performance? Look at the plugin documentation or ask for support in the appropriate plugin support forum.
Optimizing content Optimizing content
- Image Files
- Are there any unnecessary images? (e.g. Can you replace some of the images with text?)
- Make sure all image files are optimized. Choose the correct format (JPG/PNG/GIF) and compression for each image.
- Total File Number/Size
- Can you reduce the number of files needed to display the average page on your site?
- When still using HTTP1, it’s recommended to combine multiple files in a single optimized file.
You can also offload content to optimize your theme.
Upgrade Hardware Upgrade Hardware
Paying more for higher service levels at your hosting provider can be very effective. Increasing memory (RAM) or switching to a host with Solid State Drives (SSD) e.g. Digital Ocean can make a big difference. Increased number of processors and processor speed will also help. Where possible, try to separate services with different functions – like HTTP and MySQL – on multiple servers or VPS-es.
Optimize Software Optimize Software
Make sure you are running the latest operating system version e.g. Linux, Windows Server and the latest web server e.g. Apache or IIS, database e.g. MySQL server and PHP.
Perhaps you are unable to perform the tasks, and follow up on the tips, below. Just ask your hosting provider to do them for you. A good hosting provider will upgrade or move your account to an upgraded server, to match the recommendations. If needed you can switch to a managed WordPress hosting solution.
DNS: Don’t run a DNS on your WordPress server. Use a commercial service for DNS such as Amazon’s Route 53 or your domain registrar’s free offering. Using a service such as Amazon can also make switching between backup servers during maintenance or emergencies much easier. It also provides a degree of fault tolerance. If you host your DNS on external servers this will reduce the load on your primary web server. It’s a simple change, but it will offload some traffic and cpu load.
Web Server: Your web server can be configured to increase performance. There are a range of techniques from web server caching to setting cache headers to reduce load per visitor. Search for your specific web server optimizations (for example, search for “apache optimization” for more info). Some web servers have higher speed versions you can pay for such as Apache Litespeed. There are also a number of ways to tune Apache for higher performance based on your particular hosting and site configuration, e.g. Memcache.
PHP: There are various PHP accelerators available which can dramatically improve performance of your PHP files. This will apply to all PHP files, not just your WordPress installation. Search for PHP optimization for more information, f.e. APC or OPcache. The W3 Total Cache plugin, described below, offers integrated support for Memcache, APC and other Opcode caching.
MySQL/MariaDB: MySQL or MariaDB optimization is a black art in itself. A few simple changes to the query cache settings can have a dramatic effect on WordPress performance because WordPress repeats a lot of queries on every request. Nowadays, with InnoDB being the default storage engine for MySQL, you have to make sure to use that. InnoDB can be optimized and fine-tuned, search for “mysql optimization”, “mysql innodb performance” or “innodb optimization” or for more information and examples. Search for “mysql convert myisam to innodb” for information on how to convert older MyISAM tables to InnoDB.
A great example of how WordPress has been optimized was presented by Iliya Polihronov at WordCamp San Francisco 2012. Iliya does, among other things, server optimization for WordPress.com.
Don’t run a mail server on your WordPress server. For your contact form, use something like Contact Form 7 with free Mailgun.
Caching Plugins Caching Plugins
Plugins like W3 Total Cache or WP Super Cache can be easily installed and will cache your WordPress posts and pages as static files. These static files are then served to users, reducing the processing load on the server. This can improve performance several hundred times over for fairly static pages.
When combined with a system level page cache such as Varnish, this can be quite powerful. If your posts/pages have a lot of dynamic content configuring caching can be more complex.
W3 Total Cache
W3 Total Cache (W3TC) is the latest generation in WordPress performance plugins, combining the research of web development authorities to provide an optimal user experience for WordPress sites. These detailed guides walk you through
W3TC is unique in its ability to optimize server side and client side performance, adding functionality otherwise unavailable natively:
- Page Caching: W3TC helps to decrease response time by creating static HTML versions of pages, allowing web servers to serve them without invoking PHP. It automatically updates the cache when comments are made or pages are edited.
- Database Caching: Database queries (objects) are also cached, allowing many sites to reduce the time needed to generate new pages. This is especially useful for sites that receive a lot of comments.
- Headers: W3TC manages the headers (entity tag, cache-control, expires) which control the caching of files in web browsers, reducing server load and improving the user’s perceived performance.
W3TC can be used to optimize WordPress in both single- and multi-server environments through either shared or dedicated hosting.
WP Super Cache
WP Super Cache is a static page caching plugin for WordPress. It generates HTML files that are served directly by Apache without processing comparatively heavy PHP scripts, helping you to make significant speed gains on your WordPress blog.
Using WP Super Cache allows your server to serve cached HTML pages at the same speed it serves regular graphic files. Consider WP Super Cache if your site is struggling to cope with its daily number of visitors, or if it appears on Digg.com, Slashdot.org or any other popular site.
Server-side Caching Server-side Caching
Web server caching‘ is more complex but is used in very high traffic sites. A wide range of options are available, beyond the scope of this article. The simplest solutions start with the server caching locally while more complex and involved systems may use multiple caching servers (also known as reverse proxy servers) “in front” of web servers where the WordPress application is actually running. Adding an opcode cache like Alternative PHP Cache (APC) to your server will improve PHP’s performance by many times.
Varnish Cache works in concert with W3 Total Cache to store pre-built pages in memory and serve them quickly without requiring execution of the Apache, PHP, WordPress stack.
As described within, using a plugin for comments such as Disqus instead of native WordPress comments can assist Varnish by not requiring your readers to login to WordPress and increasing the number of page views that Varnish can serve out of the cache.
Browser Caching Browser Caching
Look into HTTP Cache-Control (specifically max-age) and Expires headers, as well as Entity Tags for more information.
W3 Total Cache integrates support for browser caching and ETags.
Further Reading Further Reading
- W3 Total Cache Plugin (by Dougal Campbell)
- Holy Shmoly!: WP Super Cache
- Best Practices for Speeding Up Your Web Site – Expires / Cache-Control Header and ETags (by Yahoo! Developer Network)
- WebSiteOptimization.com: Use Server Cache Control to Improve Performance
Use a content Delivery Network (CDN) Use a content Delivery Network (CDN)
CloudFlare is a popular Content Delivery Network, which also offers Internet Security services. Plans start from free, but additional features are available for extra costs. CloudFlare is a fixed-cost CDN, meaning they charge by features instead of usage. CloudFlare allows you to route your sites traffic through their network before coming back to your origin host.
Amazon Cloudfront uses the Amazon S3 service to provide Content Delivery Network (CDN) functionality for your static files. A CDN is a service which caches your static files on numerous web servers around the world. Providing faster download performance for your users no matter where they are. It’s recommended that you use Cloudfront in tandem with S3 and not only S3 alone; the costs are not significantly different.
MaxCDN is a pay-per-usage Content Delivery Network (CDN) similar to Amazon Cloudfront. Among the differences are support for Video-on-demand as well as “mirroring” (no uploading required) of files, although you can upload them if you prefer.
KeyCDN and MaxCDN are among the most affordable CDN options available, they’re able to beat the pricing of competitors like Amazon because they are a division of a much larger CDN Providers.
Static Content Static Content
Some web servers are optimized to serve static files and can do so far more efficiently than more complex web servers like Apache, for example lighttpd.
Amazon Simple Storage Service (S3) is a dedicated static file hosting service on a pay-per-usage basis. With no minimum costs, it might be practical for lower traffic sites which are reaching the peak that a shared or single server can handle.
Multiple Hostnames Multiple Hostnames
There can also be user improvements by splitting static files between multiple hostnames. Most browser will only make 2 simultaneous requests to a server, so if you page requires 16 files they will be requested 2 at a time. If you spread that between 4 host names they will be requested 8 at a time. This can reduce page loading times for the user, but it can increase server load by creating more simultaneous requests. Also, known is “pipelining” can often saturate the visitor’s internet connection if overused.
Offloading images is the easiest and simplest place to start. All images files could be evenly split between three hostnames (assets1.yoursite.com, assets2.yoursite.com, assets3.yoursite.com for example). As traffic grows, these hostnames could be moved to your own server. Note: Avoid picking a hostname at random as this will affect browser caching and result in more traffic and may also create excessive DNS lookups which do carry a performance penalty.
Your feeds can quite easily be offloaded to an external service. Feed tracking services like Google FeedBurner will do this automatically, the Feedburner servers will handle all the feed traffic and only update the feed from your site every few minutes. This can be a big traffic saver.
Likewise you could offload your own feeds to a separate server (feeds.yoursite.com for example) and then handle your own feed stats / advertising.
Further Reading Further Reading
- Using Amazon S3 / Cloudfront to offload images: Amazon S3 and CloudFront with WordPress,
- Reducing Your Website’s Bandwidth Usage
There are a number of ways to compress files and data on your server so that your pages are delivered more quickly to readers’ browsers. W3 Total Cache described above integrates support for most of the common approaches to compression.
It’s also important to compress your media files – namely images. The WP Smushit plugin can help with this.
Database Tuning Database Tuning
Cleaning Your Database Cleaning Your Database
The WP Optimize plugin can help you reduce extra clutter in your database.
You can also instruct WordPress to minimize the number of revisions that it saves of your posts and pages.
Adding Servers Adding Servers
While it requires additional expertise, adding servers can be a powerful way to increase performance. I highly recommend reading Architecting a Highly Scalable WordPress Site in AWS A guide for building a more expensive, highly scalable AWS implementation using Amazon’s Relational Data Store (RDS).
You can use Amazon’s Elastic Load Balancer to spread traffic across multiple web servers and you can use HyperDB or Amazon’s RDS to run more scalable or multiple database servers.
Additional Resources Additional Resources
Further Reading Further Reading
- High Traffic Tips for WordPress
- 10 Practical Tips To Optimize WordPress hosting
- 16 Quick Tips to Improve WordPress Performance – INFOGRAPHIC
- 11 Ways to Speed Up WordPress
- On a quest for ultimate website performance
- WordPress Optimization Infographic
- 21 easy tweaks to make your WP site load faster
- How to Speed Up WordPress Website with Image Optimization
- Speeding up WordPress load from 4.23s to 1.33s (Case Study)
- 10 tips for better WordPress optimization
- Yahoo! Developer Network: Exceptional Performance
WordCamp Performance Presentations WordCamp Performance Presentations
- High Performance WordPress = Iliya Polihronov
- WordPress Optimization from WordCamp Israel 2013
- WordCamp 2007 Video of the Presentation on HyperDB and High Performance
- Copy of the Slides on HyperDB and High Performance
- 50 tips su Web Performance Optimization per siti ad alto traffico WordCamp Bologna (Italy) 2013